Honda CR-V: Handling the Unexpected
Honda CR-V 2017-2026 Owner's Manual / Handling the Unexpected
- Tools
- If a Tire Goes Flat
- Changing a Flat Tire. Getting Ready to Replace the Flat Tire
- How to Set Up the Jack
- Replacing the Flat Tire
- Storing the Flat Tire
- TPMS and the Compact Spare Tire
- Engine Does Not Start
- Jump Starting
- Shift Lever Does Not Move
- Overheating
- Indicator, Coming On/Blinking
- If the Low Oil Pressure Indicator Comes On
- If the Charging System Indicator Comes On
- If the Malfunction Indicator Lamp Comes On or Blinks
- If the Brake System Indicator (Red) Comes On or Blinks
- If the Brake System Indicator (Red) Comes On or Blinks at the Same Time When the Brake System Indicator (Amber) Comes On
- If the Electric Power Steering (EPS) System Indicator Comes On
- If the Low Tire Pressure/TPMS Indicator Comes On or Blinks
- Fuses
- Emergency Towing
- When You Cannot Open the Tailgate
- Refueling
Accessories and Modifications
WARNING
Improper accessories or modifications can
affect your vehicle's handling, stability, and
performance, and cause a crash in which
you can be seriously hurt or killed...
Tools
T..
Other information:
Honda CR-V 2017-2026 Owner's Manual: Receiving SiriusXM® Radio
Switch to the SiriusXM® mode by using the ENTER button on the steering wheel, or through the audio/information screen, and stay in this mode for about 30 minutes until the service is activated. Make sure your vehicle is in an open area with good reception...
Honda CR-V 2017-2026 Owner's Manual: Resetting the Display
Reset the Maintenance Minder display if you have performed the maintenance service. Turn the ignition switch to ON *1 . Press the (display/information) button repeatedly until the appears. Press the ENTER button. Press and hold the ENTER button for about 10 seconds to enter the reset mode...
Categories
- Manuals Home
- Honda CR-V Owners Manual
- Honda CR-V Service Manual
- How to Turn Off the Auto High-Beam
- Wallpaper Setup
- Rear Seats
- New on site
- Most important about car
Seat Belt Reminder
The seat belt system includes an indicator on the instrument panel to remind the driver or a front passenger or both to fasten their seat belts.
If the ignition switch is turned to ON
*1 and
a seat belt is not fastened, a beeper will sound
and the indicator will blink. After a few
seconds, the beeper will stop and the
indicator will come on and remain illuminated
until the seat belt is fastened.
Copyright © 2026 www.hocrv.com