Honda CR-V: Audio/Information Screen / Switching the Display

Audio
Shows the current audio information.
Clock/Wallpaper
Shows a clock screen or an image you import.
Change display
- Press the MENU/CLOCK button.
- Rotate
to select
Settings, then press
.
- Rotate
to select Display
Change, then press
.
- Rotate
to select
Wallpaper, then press .
- If you want to return to the audio/information screen, select
Audio.
You can change, store, and delete the wallpaper on the audio/information
screen.
Import wallpaper
You can import up to three images, one at a time, for wallpaper from a USB
flash drive...
Other information:
Allow you to operate the audio system while driving. The information is shown
on the driver information interface.
Buttons
Press or
to cycle through the audio
mode as follows:
Models with color audio system
FM1→FM2→AM→USB/iPod→Pandora®→Bluetooth® Audio
Models with Display Audio
FM→AM→SiriusXM®* →USB→iPod→Bluetooth® Audio→Pandora®* →Apps *→Audio Apps *
* Not available on all models
Models with Display Audio
ENTER Button
When listening to the radio and SiriusXM®** Not available on all
models
From the audio screen in the driver information interface, press
ENTER to switch
the display to a preset list you stored in the preset buttons...
The audio system is disabled when it is disconnected from the power source,
such as
when the battery is disconnected or goes dead. In certain conditions, the system
may display a code entry screen. If this occurs, reactivate the audio system.
Reactivating the audio system
Turn the ignition switch to ON
*1 ...
Categories

The seat belt system includes an indicator on
the instrument panel to remind the driver or a
front passenger or both to fasten their seat
belts.
If the ignition switch is turned to ON
*1 and
a seat belt is not fastened, a beeper will sound
and the indicator will blink. After a few
seconds, the beeper will stop and the
indicator will come on and remain illuminated
until the seat belt is fastened.
read more