Honda CR-V: When Driving / Real Time AWD with Intelligent Control System™*

Honda CR-V 2017-2025 Owner's Manual / Driving / When Driving / Real Time AWD with Intelligent Control System™*

* Not available on all models

When the system senses a loss of front wheel traction, it automatically transfers some power to the rear wheels. This allows you to utilize all available traction and may increase mobility.

You still need to exercise the same care when accelerating, steering, and braking that you would in a two wheel drive vehicle.

If you excessively spin all four wheels and overheat the AWD system, only the front wheels receive power. Stop until the system cools down.

NOTICE

Do not continuously spin the front tires of your vehicle. Continuously spinning the front tires can cause transmission or rear differential damage.

The AWD system may not function properly if tire type and size are mixed. Make sure to use the same size and type of tire, and the air pressures as specified.

LaneWatch™*

* Not available on all models LaneWatch is an assistance system that allows you to check the passenger side rear areas displayed on the audio/information screen when the turn signal is activated to the passenger’s side...

Tire Pressure Monitoring System (TPMS)

Instead of directly measuring the pressure in each tire, the TPMS on this vehicle monitors and compares the rolling radius and rotational characteristics of each wheel and tire while you are driving to determine if one or more tires are significantly under-inflated...

Other information:

Honda CR-V 2017-2025 Owner's Manual: Maintenance Items Under the Hood

Opening the Hood Park the vehicle on a level surface, and set the parking brake. Pull the hood release handle under the lower left corner of the dashboard. The hood will pop up slightly. Push the hood latch lever (located under the front edge of the hood to the center) to the side and raise the hood...

Honda CR-V 2017-2025 Owner's Manual: Seat Belt with Detachable Anchor

Pull out the seat belt’s small latch plate and the latch plate from each holding slot in the ceiling. Line up the triangle marks on the small latch plate and anchor buckle. Make sure the seat belt is not twisted. Attach the belt to the anchor buckle...