Honda CR-V: Driving / Fuel Economy and CO2 Emissions
Improving Fuel Economy and Reducing CO2 Emissions
Achieving fuel economy and reducing CO2
emissions is dependent on several
factors, including driving conditions, load weight, idling time, driving habits,
and
vehicle condition. Depending on these and other factors, you may not achieve the
rated fuel economy of this vehicle.
Maintenance and Fuel Economy
You can optimize your fuel economy with proper maintenance of your vehicle.
Always maintain your vehicle in accordance with the messages displayed on the
driver information interface.
- Use engine oil with the viscosity recommended.
- Maintain the specified tire pressure.
- Do not load the vehicle with excess cargo.
- Keep your vehicle clean. A buildup of snow or mud on your vehicle's
underside
adds weight and increases wind resistance.
Direct calculation is the recommended method to
determine actual fuel consumed while driving.

In Canada, posted fuel economy numbers are
established following a simulated test. For more
information on how this test is performed, please visit
http://oee.nrcan.gc.ca/
Your fuel tank is not equipped with a fuel filler cap. You can insert the
filler nozzle
directly into the filler neck. The tank seals itself again when you pull out the
filler
nozzle...
The scheduled maintenance intervals for replacing
the filter is indicated on the driver information
interface. Follow the information of when to replace
them...
Other information:
Pull the front door inner handle.
The door unlocks and opens in one motion.
Unlocking and opening the driver's door from
the inner handle unlocks all the other doors.
To avoid all the doors to be unlocked, use the
lock tab on the driver's door to unlock, then
lock again before opening the door...
* Not available on all models
The power mode must be in ON to use the
seat heaters.
Press the seat heater button:
Once - The HI setting (three indicators on)
Twice - The MID setting (two indicators on)
Three times - The LO setting (one indicator on)
Four times - The OFF setting (no indicators on)
When the power mode is turn on after it is
turned off, the previous setting of seat heaters
is maintained...