Honda CR-V: Driver Information Interface / Odometer and Trip Meter

Honda CR-V 2017-2025 Owner's Manual / Instrument Panel / Gauges and Displays / Driver Information Interface / Odometer and Trip Meter

Odometer

Shows the total number of miles (U.S.) or kilometers (Canada) that your vehicle has accumulated.

Trip Meter

Shows the total number of miles (U.S.) or kilometers (Canada) driven since the last reset. Meters A and B can be used to measure two separate trips.

Кредит или займ без фото с паспортом в Москве.

Switch between trip meter A and trip meter B by pressing the Honda CR-V. Odometer and Trip Meter knob, or by using the customized features on the driver information interface or audio/information display.

Resetting a trip meter

To reset a trip meter, display it, then press and hold the knob. The trip meter is reset to 0.0.

Switching the Display

Main displays Press the (display/information) button and press or to change the display. Press ENTER to see detailed information. * Not available on all models Trip computer Press the (TRIP) knob to change the display...

Average Fuel Economy, Range, Elapsed Time, Average Speed and Engine Oil Life

Average Fuel Economy Shows the estimated average fuel economy of each trip meter in mpg or l/100 km. The display is updated at set intervals. When a trip meter is reset, the average fuel economy is also reset...

Other information:

Honda CR-V 2017-2025 Owner's Manual: Protecting Smaller Children

If a child is at least one year old and within the weight range indicated by the child seat manufacturer, the child should be properly restrained in a firmly secured forward-facing child seat. Forward-facing child seat placement We strongly recommend placing a forward-facing child seat in a rear seating position...

Honda CR-V 2017-2025 Owner's Manual: Emergency Engine Stop

Models with smart entry system The ENGINE START/STOP button may be used to stop the engine due to an emergency situation even while driving. If you must stop the engine, do either of the following operations: Press and hold the ENGINE START/STOP button for about two seconds...