Other information:
You can turn the auto high-beam system off. If you want to turn the system
off or
on, turn the ignition switch to ON
*1 , then carry out the following procedures
while the vehicle is stationary.
*1: Models with the smart entry system have an ENGINE START/STOP
button instead of an ignition switch...
Increase or decrease the vehicle speed using the RES/+ or –/SET
button on the
steering wheel.
Each time you press the RES/+ or –/SET button, the vehicle
speed is increased or
decreased by about 1 mph or 1 km/h accordingly.
If you keep pressing the RES/+ or –/SET button, the
vehicle speed increases or
decreases by about 5 mph or 5 km/h accordingly...