Honda CR-V: Interior Lights/Interior Convenience Items / Sunglasses Holder
To open the sunglasses holder, press and release the indent. To close, press it again until it latches.
You can store eyeglasses and other small items in this holder.
Keep the holder closed while driving except when accessing stored items.
Conversation mirror
The sunglasses holder comes with a mirror. Open the sunglasses holder fully, then push it back to the first detent.
You can use the mirror to view the rear seats.
Cargo Hooks
The cargo hooks on the driver's side of the
cargo area can be used to hang a light items.
NOTICE
Do not hang a large object or an object that weighs
more than 6 lbs (3 kg) on the side cargo hooks...
Heated Steering Wheel *
*: Canadian models only, if equipped
The power mode must be in ON to use the
heated steering wheel.
Press the button on the right side of the
steering wheel...
Other information:
Honda CR-V 2017-2025 Owner's Manual: About Your Seat Belts
Seat belts are the single most effective safety device because they keep you connected to the vehicle so that you can take advantage of many built-in safety features. They also help keep you from being thrown against the inside of the vehicle, against any passengers, or out of the vehicle...
Honda CR-V 2017-2025 Owner's Manual: Automatic Brake Hold
Keeps the brake applied after releasing the brake pedal until the accelerator pedal is pressed. You can use this system while the vehicle is temporarily stopped, like at traffic lights and in heavy traffic. WARNING Activating the automatic brake hold system on steep hills or slippery roads may still allow the vehicle to move if you remove your foot from the brake pedal...
Categories
- Manuals Home
- Honda CR-V Owners Manual
- Honda CR-V Service Manual
- Front Sensor Camera
- Rear Seats
- Auto Idle Stop System ON/OFF
- New on site
- Most important about car
Seat Belt Reminder
The seat belt system includes an indicator on the instrument panel to remind the driver or a front passenger or both to fasten their seat belts.
If the ignition switch is turned to ON
*1 and
a seat belt is not fastened, a beeper will sound
and the indicator will blink. After a few
seconds, the beeper will stop and the
indicator will come on and remain illuminated
until the seat belt is fastened.
