Honda CR-V: To Use Maintenance Minder™ / Maintenance Service Items
Honda CR-V 2017-2024 Owner's Manual / Maintenance / Maintenance Minder™ / To Use Maintenance Minder™ / Maintenance Service Items
- Inspect idle speed every 160,000 miles (256,000 km).
- Adjust the valves during services A, B, 1, 2, or 3 if they are noisy.
U.S. models
Canadian models
- Inspect idle speed every 256,000 km (160,000 miles).
- Adjust the valves during services A, 0, 9, 1, 2, or 3 if they are noisy.
Resetting the Display
Reset the Maintenance Minder display if you have performed the maintenance
service.
Turn the ignition switch to ON
*1 .
Press the
(display/information) button repeatedly until the
appears...
Other information:
Honda CR-V 2017-2024 Owner's Manual: Voice Recognition
To achieve optimum voice recognition when using the voice control system: Make sure the correct screen is displayed for the voice command that you are using.The system recognizes only certain commands. Available voice commands. Close the windows and moonroof * ...
Honda CR-V 2017-2024 Owner's Manual: If the Smart Entry Remote Battery is Weak
Models with smart entry system If the beeper sounds and the To Start, Hold Remote Near Start Button message appears on the driver information interface; and the ENGINE START/STOP button flashes and the engine will not start. Start the engine as follows: Touch the center of the ENGINE START/ STOP button with the H logo on the smart entry remote while the ENGINE START/STOP button is flashing...
Categories
- Manuals Home
- Honda CR-V Owners Manual
- Honda CR-V Service Manual
- Compass Zone Selection
- Front Seats
- How to Turn Off the Auto High-Beam
- New on site
- Most important about car
Auto High-Beam
The front sensor camera detects the light sources ahead of the vehicle such as the lights of a preceding or oncoming vehicle, or street lights. When you are driving at night, the system automatically switches the headlights between low beam and high beam depending on the situation.
Copyright © 2024 www.hocrv.com