Honda CR-V: Operating the Switches Around the Steering Wheel / Turn Signals
The turn signals can be used when the ignition
switch is in ON 
*1 .
*1: Models with the smart entry system have an ENGINE START/STOP button instead of an ignition switch.
One-touch turn signal
When you lightly push up or down and release the turn signal lever, the exterior turn signals and turn signal indicator blink three times. This feature can be used when signaling for a lane change.
Other information:
Honda CR-V 2017-2025 Owner's Manual: Automatic Brake Hold
Keeps the brake applied after releasing the brake pedal until the accelerator pedal is pressed. You can use this system while the vehicle is temporarily stopped, like at traffic lights and in heavy traffic. WARNING Activating the automatic brake hold system on steep hills or slippery roads may still allow the vehicle to move if you remove your foot from the brake pedal...
Honda CR-V 2017-2025 Owner's Manual: Inspecting and Changing Fuses
Turn the ignition switch to LOCK *1 . Turn the headlights and all accessories off. Remove the fuse box cover. Check the large fuse in the engine compartment. If the fuse is blown, use a Phillips-head screwdriver to remove the screw and replace it with a new one...
Categories
- Manuals Home
- Honda CR-V Owners Manual
- Honda CR-V Service Manual
- Locking/Unlocking the Doors Using a Key
- TPMS Calibration
- Front Sensor Camera
- New on site
- Most important about car
How the Front Airbags Work
While your seat belt restrains your torso, the front airbag provides supplemental protection for your head and chest.
The front airbags deflate immediately so that they won't interfere with the driver's visibility or the ability to steer or operate other controls.
Copyright © 2025 www.hocrv.com